Sterling F&T Steam Trap, Model 78D, 1-1/2″ pipe, 15 psi
Sterling float & thermostatic model FT-78-15 1-1/2″pipe 15lb maximum operating pressure, capacity 8,280 pounds per hour. Sterling float and thermostatic traps are recommended for: modulating pressures where widlely varying loads are present, and pressures vary from maximum to vacuum. They are a good choice for their ability to vent air at very low pressures, handle start up air loads, and operate against back pressure. An inverted bucket trap would be a better selection for: resistance to hydraulic shock, damage from freezing, and ability to handle dirt. The Sterling “FT” Series Float & thermostatic trap allows steam to enter from one side of the trap, and the condensate to discharge from the same side of the trap. The “FT” Series cast iron trap has a maximum operating pressure of 125 psi and comes standard with a stainless steel internal parts. The “FT” Series are continuous drainage and are designed for low, medium and high pressure steam mains. The 1-1/2″ FT-78-15, has same side inlet to outlet center-to-center dimension of 3-3/8″,offset by 3/8″, a height of 6-3/4″, a depth of 11-1/2″ and a weight of 27lbs.
- PART NUMBER
- PRODUCT WEIGHT