Marsh F&T Steam Traps, Model 8, 1-1/2″ pipe, 15 psi
$181.69
Marsh float & thermostatic model 8 1-1/2″pipe 15lb maximum operating pressure, capacity 1,380 pounds per hour. Marsh float and thermostatic traps are recommended for: modulating pressures where widlely varying loads are present, and pressures vary from maximum to vacuum. They are a good choice for their ability to vent air at very low pressures, handle start up air loads, and operate against back pressure. The float & thermostatic trap is not a good choice for : resistance to hydraulic shock, damage from freezing, and ability to handle dirt. The Marsh 8 Float & thermostatic trap allows steam to enter from either side of the trap, and the condensate to discharge from the opposite side or the same side of the trap. The 8 cast iron trap has a maximum operating pressure of 15 psi and comes a brass mechanism and copper float. The number 8 is continuous drainage and is designed for low pressure steam mains. The 1-1/2″ 8 has a inlet to outlet width of 8″ for in and out opposite side,or, same side inlet to outlet center-to-center dimension of 4-3/16″, a height of 10-9/16″ and a weight of 11lbs.
- Manufacturer
- Marsh
- SKU
- MD1025
- PART NUMBER
- 8112
- PRODUCT WEIGHT
- 17