Marsh F&T Steam Traps, Model 17, 3/4″ pipe, 15 psi

$112.25

Marsh float & thermostatic model 17 3/4″pipe 15lb maximum operating pressure, capacity 230 pounds per hour. Marsh float and thermostatic traps are recommended for: modulating pressures where widlely varying loads are present, and pressures vary from maximum to vacuum. They are a good choice for their ability to vent air at very low pressures, handle start up air loads, and operate against back pressure. The float & thermostatic trap is not a good choice for : resistance to hydraulic shock, damage from freezing, and ability to handle dirt. The Marsh 17 Float & thermostatic trap allows steam to enter from one side of the trap, and the condensate to discharge from the opposite side. The 17 cast iron trap has a maximum operating pressure of 15 psi and comes a brass mechanism and copper float. The number 17 is continuous drainage and is designed for low pressure steam mains. The 3/4″ 17 has a inlet to outlet width of 5″ for in and out opposite side, a height of 6-9/16″ and a weight of 9lbs.

Manufacturer

Marsh

SKU

MD1010

PART NUMBER

1734

PRODUCT WEIGHT

4