Armstrong International D500865 Bucket Trap With Integral Strainer And Thermic Bucket Model 883T
3/4″pipe 15lb maximum operating pressure, 1/2″ orifice, capacity 39000 pounds per hour. Armstrong inverted bucket traps are a simple leverage system that uses the weight of the bucket to open the valve against pressure. The inverted bucket has only two moving parts which means no complicated linkages to bind or clog. The inverted bucket trap is rated excellent on the following: resistance to wear, corrosion, and hydronic shock. Operation against back pressure, ability to purge air, and handle dirt, and performance under light loads. The Armstrong float and thermostatic trap is better suited to vent air at low pressures. The Armstrong 883T horizontal line inverted trap with thermic bucket and intergal stainer allows steam to enter from one side of the trap, and the condensate to discharge from the opposite side of the trap. The thermic bucket has a bi-metal air vent on the top rather than the standard “weep hole”, this allows for discharge of large amounts of air on start up. The 883T cast iron trap has a maximum operating pressure of 250 psi and comes standard with a stainless steel bucket. The 883T has a inlet to outlet dimension of 7-7/8″, a height of 12-3/8″ and a weight of 31lbs.
- PART NUMBER
- PRODUCT WEIGHT