Armstrong F&T Steam Trap, Model 175-A6, 1-1/2″ pipe, 175 psi

Armstrong float & thermostatic model 175-A6 1-1/2″pipe 175lb maximum operating pressure, capacity 3,200 pounds per hour. Armstrong float and thermostatic traps are recommended for: modulating pressures where widlely varying loads are present, and pressures vary from maximum to vacuum. They are a good choice for their ability to vent air at very low pressures, handle start up air loads, and operate against back pressure. The Armstrong inverted bucket trap would be a better selection for: resistance to hydraulic shock, damage from freezing, and ability to handle dirt. The Armstrong 1-1/2″ “A” Series Float & thermostatic trap allows steam to enter from one side of the trap, and the condensate to discharge from the opposite side or the same side of the trap. The 1-1/2″ “A” Series cast iron trap has a maximum operating pressure of 175 psi and comes standard with a stainless steel internal parts. The “A” Series are continuous drainage and are designed for medium and high pressure steam mains. The 1-1/2″ “A Series” has a inlet to outlet dimension of 5-3/4″ width for in and out opposite side,or, same side inlet to outlet center-to-center dimension of 4-3/16″, a height of 7-7/16″ and a weight of 18-3/4lbs.

Manufacturer

Armstrong

SKU

AN1268

PART NUMBER

175A6112

PRODUCT WEIGHT

18.75