Shipco Steam Condensate Pump 85LP, One 1/2 HP Pump, 12 Gallon Steel Tank

$1,045.14

Shipco model 85LP compact condensate pump, 8,000 EDR, simplex pump, 3/4″ discharge at 25lb., 7-1/2 gallon steel receiver, delivery of 12 gallons per minute, 1/2HP 115v 1phase, weight is 140lbs. Shipco condensate pump units are designed to collect return condensate from the steam system and return it to the boiler in most cases via a boiler feed tank & pump unit. As condensate flows by gravity or from other pumping units to this receiver tank, the receiver fills with water. The float switch assembly then rises and signals the motor on the pump to start and begin pumping the condensate until the float drops with the lower water level and breaks the contact on the switch to shut the pump off. Shipco condensate pumps are made in simplex (one pump) or duplex (two pumps). Duplex units are supplied with a mechanical alternator in place of the simplex float switch. The mechanical alternator will alternate from one pump to the other pump during cycles. This means longer life to the unit, plus it provides automatic back-up for the first pump in case of failure or it cannot handle the return load. Tank receivers are steel, the pumps are bronze fitted and run at 3450 RPM.

Manufacturer
Shipco
SKU
SF1006
PART NUMBER
85LP
PRODUCT WEIGHT
105
OVER 7,000 PARTS AND SUPPLIES AVAILABLE! VIEW PRODUCTS
Cart Close X
No products in the cart.