ajax load

Armstrong International - D500056

Armstrong float & thermostatic model 30-A6 1-1/2"pipe 30lb maximum operating pressure, capacity 4,050 pounds per hour. Armstrong float and thermostatic traps are recommended for: modulating pressures where widlely varying loads are present, and pressures vary from maximum to vacuum. They are a good choice for their ability to vent air at very low pressures, handle start up air loads, and operate against back pressure. The Armstrong inverted bucket trap would be a better selection for: resistance to hydraulic shock, damage from freezing, and ability to handle dirt. The Armstrong 1-1/2" "A" Series Float & thermostatic trap allows steam to enter from one side of the trap, and the condensate to discharge from the opposite side or the same side of the trap. The 1-1/2" "A" Series cast iron trap has a maximum operating pressure of 175 psi and comes standard with a stainless steel internal parts. The "A" Series are continuous drainage and are designed for medium and high pressure steam mains. The 1-1/2" "A Series" has a inlet to outlet dimension of 5-3/4" width for in and out opposite side,or, same side inlet to outlet center-to-center dimension of 4-3/16", a height of 7-7/16" and a weight of 18-3/4lbs.
D500056 - Armstrong International
Manufacturer Armstrong
SKU AN1233
Part Number D500056
Product Weight 18.75 lbs.
U/M EA
Series FT-30A Series
Steam Trap Type Float & Thermostatic
Material Cast Iron
Connection Type No
Connection Size 1-1/2" NPT
Max Body Pressure 175 psi
Max Operating Pressure 30 psi
Seat Orifice I.D. 3/8"
$469.65
Quantity
Manufacturer Armstrong
SKU AN1233
Part Number D500056
Product Weight 18.75 lbs.
U/M EA
Series FT-30A Series
Steam Trap Type Float & Thermostatic
Material Cast Iron
Connection Type No
Connection Size 1-1/2" NPT
Max Body Pressure 175 psi
Max Operating Pressure 30 psi
Seat Orifice I.D. 3/8"
$469.65
Quantity
GO BACK
ADD TO CART
cart pullout top
shopping cart
cart pullout bottom
PRODUCTQTYPRICE
0
$ 0.00
shopping cart CHECKOUT